68
Revision 5.5
6.8.1
MINI POINT Micromanipulator
By selecting the MINI POINT in D4, see section 6.7.1 “Display”, page 62, and its focal length,
this micromanipulator can be used with the scanner. The following shape sizes can be selected
depending on focal length:
Shape
Focal length MINI POINT
200 mm
250 mm
300 mm
350 mm
400 mm
Triangle
3–12 mm
4–15 mm
4–18 mm
5–21 mm
6–24 mm
Square
3–12 mm
4–15 mm
4–18 mm
5–21 mm
6–24 mm
Rectangle
6–12 mm
7–15 mm
9–18 mm
10–21 mm
12–22 mm
Hexagon
3–12 mm
4–15 mm
4–18 mm
5–21 mm
6–24 mm
Circle
3–12 mm
4–15 mm
4–18 mm
5–21 mm
6–24 mm
Thick ring
9–12 mm
11–15 mm
13–18 mm
16–21 mm
18–24 mm
Thin ring
6–12 mm
7–15 mm
9–18 mm
10–21 mm
12–24 mm
Straight line
1–8 mm
1–11 mm
1–13 mm
1–15 mm
1–17 mm
Curved line
1–8 mm
1–11 mm
1–13 mm
1–15 mm
1–17 mm
Strongly
curved line
1–8 mm
1–11 mm
1–13 mm
1–15 mm
1–17 mm
Tab. 6-6:
Figure Sizes of scan shapes when scanning with the MINI POINT micromanipulator
