38
Ignition
Perform the following operations:
Before switching the fireplace heating system on, make
sure that the control unit switch is on;
Make sure that there is water in the system;
Regulate the thermostat that controls the pump to a
temperature of 55-60 °C;
Open the smoke damper completely (optional)
;
Open the primary air front slots;
Open the hatches or lift the vertical sliding door;
Light the fire using seasoned, thin wood, if possible;
When the wood has ignited well, close the doors, adjust the
smoke damper and the combustion agent air via the front
slots;
NEVER IGNITE THE FIREPLACE HEATING SYSTEM USING
ALCOHOL OR OTHER HIGHLY INFLAMMABLE LIQUIDS.
Remember always to open the smoke damper and close the
primary air front slots a few seconds before loading the
fireplace heating system with new wood in order to prevent
the backflow of smoke into the environment.
