34
FIREPLACE HEATING SYSTEM COVERING
When installation has been completed, do not cover the
fireplace heating system for at least 6-7 days, in order to
verify the tightness of all hydraulic joints of the fireplace
heating system itself.
BEFORE COVERING THE FIREPLACE HEATING SYSTEM,
DISASSEMBLE THE TWO DOOR LOCK ANGLES AND
CHECK THAT THE STEEL CABLE IS INSIDE THE METAL
WHEEL GROOVE.
All of the front part must be on view and able to be
inspected. The two angles for inspection of the wheel and
steel rope must be easily accessible also after the fireplace
heating system has been covered.
If the fireplace heating system should have defects or
breakage, the warranty excludes all hydraulic
disassembly and re-assembly works, any masonry work
and any other intervention that is made necessary in
order to remove the fireplace heating system from the
covering.
The plasterboard hood must be easy to inspect and/or
disassemble. An inspection hole must be made (see following
figure) in order to access the upper part of the fireplace heating
system.