20
CONNECTIONS
Electrical connection
The electric connection must only be performed by
qualified
staff,
with respect to general and local Safety Standards in
force.
Check that the power supply voltage and frequency
correspond to 220 V
– 50 Hz.
Appliance safety is obtained when the same is correctly
connected to an efficient earth plant.
In the electric connection to the mains power supply, envision a 6
A
– Id 30 mA differential magnet circuit breaker switch with
relevant breaking load. The electric connections, including the
earth, must be made after the voltage has been removed from
the electric plant. When realising the system remember that the
cables must be placed in an unmovable and away from parts
subject to high temperatures. During the final wiring of the circuit,
only use components with a suitable electric protection rating.
KLOVER srl declines all responsibility for injury to persons,
animals or damage to objects deriving from the failure to
connect the network to the fireplace heating system earth
plant and failure to comply with the IEC Standards.
