43
Maintenance of the boiler body
The fireplace heating system is equipped with a special magnesium
anode to protect the boiler body and stainless steel heat exchangers
from corrosion due to stray currents in the system.
This anode protects from galvanic corrosion.
The anode must be controlled at least once a year and
replaced when its diameter measures less than 15 mm.
To inspect the boiler body, remove the upper lid fixed using
the four knobs.
To replace the anode, just loosen it and screw-in the
new one, paying attention that the latter does not come
into contact with the stainless steel heat exchangers.
NEVER EMPTY THE WATER INSIDE THE FIREPLACE HEATING
SYSTEM SO AS NOT TO COMPROMISE THE DURATION OF THE
SAME.
MAGNESIUM ANODE
