klover DIVA SLIM, Installation, Use, Maintenance And Helpful Tips

Page: 27 / 52

DIVA SLIM AIR PELLET STOVE
25
EN - Rev. 1.0
Menu Meaning Settable values
PELLET TYPE
By increasing the value by a single unit, the pellet load is increased by about 2%.
-9 / +9
By reducing the value by a single unit, the pellet load is reduced by about 2%.
CHIMNEY TYPE
By increasing the value by a single unit, the flue gas extractor speed (and therefore the flow of
combustion air) is increased by about 3%.
-9 / +9
By reducing the value by a single unit, the flue gas extractor speed (and therefore the flow of
combustion air) is reduced by about 3%.
* Unauthorised access can cause serious damage to equipment, objects and the environment, as well as
personal injuries. Klover declines all responsibility deriving from improper calibration of these values.
Menu 10 – Technical calibration
Allows you to access all data reserved for the Technical Assistance Centre. Access is protected by a password.
Unauthorised access can cause serious damage to the equipment, to things and the environment as well as personal
injuries.
Menu 11 – Relax function (Menu not available)
Allows for reducing the front air fan speed for a pre-set time (90 min).
Menu 12 – Set Room Duct. (menu displayed only on specific models)
Allows for accessing and modifying the room temperature in zone 1 and zone 2, managed by the respective fans (see
also “Modifying the ducted air speed set-points”).
The image below shows the window inside the “SET ROOM DUCT.” section:
To modify the room temperature, simply select the “SET ROOM DUCT.” value to be modified (“SET ROOM 1” or “SET
ROOM 2”) by pressing button 4 (Set) or 5 (Esc).
Then press buttons 1 and 2 (Increase and Decrease) to modify the value; it is possible to set a value between 7°C and
40°C.
Press button 3 (On/Off) to exit the menu, saving the set value.
SET ROOM ZONE 1
(Room temperature of zone 1,
settable to between 7°C and
40°C)