WOOD BURNING BOILER COOKER ALTEA 110 SICURO TOP
17
EN - Rev. 1.2
OPERATION
-
ON/OFF:
The control unit is switched on/off by pressing and holding the
P1 (ON/OFF).
The
L5
LED turns on to indicate the
OFF
status.
-
SAFETY function:
If the temperature detected by the
H2O PROBE
exceeds the value of the
Safety Thermostat
, this forces the activation
of the
PUMP.
-
ALARM function:
If the temperature detected by the
H2O
PROBE
exceeds the value of the
Alarm Thermostat
, this activates the acoustic
and visual signal.
SILENCE
: pressing any button deactivates the acoustic signal for
5 minutes.
-
FROST PROTECTION function:
If the temperature detected by the
H2O PROBE
goes below the value of the
ANTIFREEZE Thermostat
, this activates
the timed
PUMP
outlet.
The relative
L1
LED turns on and
ICE
starts flashing on the display.
-
PUMP ANTI-LOCKING programme:
In the event of inactivity of the
PUMP
outlet for longer than the
ANTILOCKING Timer
, this activates the outlet of the
PUMP.
The relative
L1
LED turns on and
bLP appears on the display.
-
STANDBY function:
If the device is
OFF
and in
SECURE
mode, the device automatically positions itself to
ON
status.
-
PUMP TEST function:
Pressing and holding the
P3
key activates the
PUMP
outlet until the button is released.
The display will show
tSt
.
-
LEVEL SWITCH function:
The closure of the input closure determines the activation of the
L4
LED.
-
OUTLET function:
§
PUMP ON:
for temperatures above the PUMP thermostat setting
for temperatures above the ALARM thermostat setting
for temperatures below the ANTIFREEZE thermostat setting
§
VALVE ON:
for a temperature above the VALVE Thermostat temperature
§
AUX ON:
for a temperature above the AUX Thermostat temperature
§
SERV ON:
for temperatures above the Thermostat setting
-
DHW function:
By holding down the
P2
(-)
and
P3 (+)
buttons at the same time it is possible to activate the DHW function. At this point,
while the
L6
LED flashes, simply set the time (in minutes) for which you want to have all the heat burned for the
production of domestic hot water. This function turns the pump off for the set time in minutes. When this function is
active, the pump will turn on only if the safety temperature of 85 ° C is reached. It is possible to deactivate this function
by holding down the
P2 (-)
and
P3
(+)
buttons again.
-
OVEN LIGHT function
The light inside the oven light can be switched on by pressing the
P4 (Set)
button for 5 seconds. At this point, while the
L8 LED is flashing, set the time (in minutes) for the time chosen for the light to remain on. The oven light can be
switched off before this time by pressing and holding the
P4 (Set)
button once again.
