Instruction Manual
IDO
8065
-HILO
8065
24/08/15 Rev: 1.0.0 (TRANSLATION OF ORIGINAL LANGUAGE)
39
14.4. CONTROLS
14.4.1.
SPEED CONTROL PEDAL
It is located to the right of the steering column.
It controls the machine's speed. The motion speed is increased by lightly pressing the
pedal.
The motion direction (forward gear or reverse) is controlled by the panel selector.
The maximum speed is still settable, only during operation and then when the brushes
are working, through the knob on the control panel, next to the steering column.
14.4.2.
CONTROL AND PARKING BRAKE
The machine is equipped with parking and control brake, of the electric brake type, built
into the motor axle.
The brake is always engaged every time the machine selector is OFF and the operator is
not seated on the driving seat.
The brake is automatically disengaged with selector ON and operator seated (there is a
safety micro-switch under the seat).
There is the possibility to activate the brake, to reduce the speed or stop the machine
while in motion.
