Instruction Manual
IDO
8065
-HILO
8065
24/08/15 Rev: 1.0.0 (TRANSLATION OF ORIGINAL LANGUAGE)
19
4.1.
Declaration of absence of harmful substances
We hereby declare that our products, used in the process of assembling the machine, are produced with
materials that comply with the limits established by the regulations in force on the protection of health and
the environment and do not contain substances classified as SVHC (Substance of Very High Concern
)
in
accordance with CE 1907/2006 regulation (REACH, i.e.
R
egistration,
E
valuation,
A
uthorisation and
Restriction of
Ch
emical substances).
Although the above mentioned substances are not employed in processing cycles of raw materials and our
products, their presence cannot however be ruled out in the order of p.p.m. (parts per million), due to
micro-pollution of raw materials.
4.2.
Safety devices of fixed closing guards
The components that protect some areas that contain moving parts or live equipment are
considered fixed closing guards.
The brush plate is fitted with fixed closing guard, consisting in the plastic material
protection casing.
The steering column contains moving parts (levers for lifting the brush plate) and live
equipment (electrical panel, motors wiring). This column is protected by a plastic
material nose, that entirely encloses the head, assembled with screws.
WARNING
Do not remove the fixed closing guards. In the event of maintenance, ensure the same
are reassembled before turning on the machine and starting to work.
4.3.
Safety devices relevant to mobile guards
There are no mobile guards on the machine.
The battery compartment is housed under the upper dirty water recovery tank. In order
to access it the tank, which is hinged at the top, must be tilted over.
5. CE PLATE POSITION
The technical specifications plate bearing the CE marking is attached on the steering
upright, it is adhesive and must not be removed for any reason.
