Ecos
aire
®
CM Series Precision Air Conditioner Owners Manual
94
Ecos
aire
®
July 2007
Data subject to change without notice.
Operation Clock Change Date and/or Time
To access
Configuration Menu 1
, press
Prg
and
Esc
at the same time.
To select
Control Setup
, press
↵
three times.
Press
↓
to view the
CLOCK
menu. If the password has cleared automati-
cally, as discussed on the
Enter User Password
page, you will be asked
for it again. Follow the instructions in
Startup - Pre-startup Adjustments-
Controller Password
.
To
change the clock
, press
↵
repeatedly until the cursor is at the desired
value. The example is to change the hour.
Press either
↑
or
↓
to change the selected value.
To store the setting, press
↵
until the cursor is back in the upper left corner.
Note: This adjustment requires the user password, see Startup - Pre-start-
up Adjustments - Controller Password.
The clock is set at the factory for date and Eastern Time. These settings can be
changed as below.
Config Menu 1
System Run Hours . . . . >
Alarm History . . . . . . . .>
Control setup . . . . . . . >
Config Menu 1
System Run Hours . . . . >
Alarm History . . . . . . . .>
Control setup . . . . . . . >
CLOCK
Date = mmm/dd/yyyy
Time = hh:tt
Day = DOW
CLOCK
Date = mmm/dd/yyyy
Time = hh:tt
Day = DOW
CLOCK
Date = mmm/dd/yyyy
Time = hh:tt
Day = DOW
CLOCK
Date = mmm/dd/yyyy
Time = xx:xx
Day = DOW
Enter
Password:
0000
Prg
Esc
OPERA
TION
