Klever X SPEED, User Manual

Page: 46 / 56

46 www.klever-mobility.com
Wear
14. Wear
Your Speed Pedelec consists of many components, which are
all subject to normal wear due to their function. Therefore, all
the following components should be regularly checked and if
necessary replaced immediately:
1.
Brake discs and pads are put under stress during each
braking operation and wear as a consequence. Therefore,
they must be periodically inspected and if necessary, be
replaced immediately.
2. Tyre and inner tubes are subject to a function-related
wear and should be checked regularly. Regularly check
the air pressure and tread depth. The air pressure should
always be at the manufacturer's recommended operating
pressure, which is printed on the tyre sidewall.
Is the profile of the tyre no longer deep enough or the tyre
has cracked sidewalls, it should be replaced immediately.
3. Rims and spokes are stressed while braking or riding
over obstacles. Regularly check the concentricity of the
rim and the spoke tension. If the wheel has radial or
axial play, this should be readjusted immediately. In the
event of spoke breakage, the broken spoke should be
immediately replaced and the wheel has to be centred.
4. Chain, sprocket, chain wheels and derailleur pulley
wheels
wear out normally. Regular cleaning and
lubrication of these components will extend their service
life substantially. They should, however, in case they are
worn be replaced immediately.
5. Shifting and brake cables must be maintained regularly
and replaced if necessary. Especially if the Speed Pedelec is
often parked outdoor and exposed to the weather.
6. Hydraulic oils and lubricants change over time and lose
their effectiveness. Therefore, all lubrication points are to
be regularly cleaned and re-greased in order to minimise
wear.
7. Paintwork requires regular care. Check all paintwork for
damage and rectify this immediately. Brake and shifter
cables can rub the painted surface of the frame. Protect
those spots with a transparent foil.