Klever X SPEED, User Manual

Page: 26 / 56

26 www.klever-mobility.com
7.2 Adjustment of saddle and
handlebar
The X Speed comes in two frame sizes (M= Medium and L=
Large). The adjustment to your body size will be made with
the adjustment of the saddle, stem and handlebar. Your
dealer can do this on the spot.
In order to readjust by yourself or in the case of another cyclist,
changing the settings is briefly described below:
Caution: All work described requires mechanic
experience and appropriate tools. Use a torque wrench
to tighten the bolts and never exceed the maximum
torque of the bolts. All the necessary tooling and
information on the recommended torques can be found
in section 11 Technical Data.
Adjustment of the saddle height
The optimal saddle height is if you touch the pedal with the
heel of your stretched leg, when sitting on the saddle.
Or when you bring the ball of the foot to the centre of the
pedal, your knee should be slightly bent (Image 18). Loosen
with the proper allen key the seat clamp bolt and move
the seat post with the saddle to its proper height. Align the
saddle with the frame using the saddle nose and the bottom
bracket or top tube as references.
Fasten the bolt of the seat clamp again and check the correct
height of the saddle. Repeat the process if necessary until you
find the correct saddle height.
The distance between saddle and handlebar (by pushing the
saddle forward or backward) and the saddle angle are adjusted
by the saddle clamping bolts (Image 20) of the seat post.
The saddle should generally be positioned horizontally.
Attention: please pay attention to the recommended
torques when tightening the saddle clamp bolts (see
Chapter 11 Technical data).
Caution: The seat post may never be installed over the
minimum mark on the seat post. During riding the post
could possibly break which could lead to injuries.
The Speed Pedelec
Image 18
Image 19
Minimum Insertion mark
Seapost
screws
Image 20