Klever X SPEED, User Manual

Page: 37 / 56

37 www.klever-mobility.com
Maintenance, Care and Storage
9. Maintenance, care and
storage
Regular maintenance and care guarantee a longer lifespan of
your high-quality Speed Pedelec.
You should regularly carry out simple cleaning and care works
yourself and let the dealer do the necessary inspections.
Never clean the Speed Pedelec with a high-pressure cleaner
or a steam cleaner, as water may enter bearings, motor and
electronic contacts. Water could damage these parts due to
corrosion and short circuits.
Clean your vehicle with a damp cloth and mild detergent.
Please make sure that no electrical contacts get wet.
The contacts can be maintained and conserved from time to
time with a little care oil (e.g. 1-Step Finish Line) preservation.
Contact spray is too aggressive and doesn't preserve.
You should repair varnish damages at once. All parts liable to
corrosion should be maintained and preserved by appropriate
means.
The chain should be lubricated regularly like all other movable
mechanical parts such as the joints of the rear derailleur.
Caution: During cleaning and lubrication, avoid contact
with oil and fat on the brake pads and brake discs. The
stopping power might deteriorate and could represent a
serious risk.
Always ensure that the tyres are inflated within the
manufacturer's recommended operating pressure, which
can be found on the tyre’s sidewall. Never go over or
under the recommend range of tyre pressure.
The entire electrical system of your Speed Pedelec, such as
the motor, the sensors, the wiring harness and the battery
are maintenance-free. If you meet unexpected problems with
the system, contact or technical hotline (see also Chapter 1
Introduction) or consult an authorised Klever dealer.