Klever X SPEED, User Manual

Page: 21 / 56

21 www.klever-mobility.com
The LED lights on the charger and battery documents
the state of the charge process:
State of
charge
Charger LED Battery LED Note
Flashing Red Error detected, reset by re-plugging AC
to main
Steady Red Ready to be connected to battery
0% Flashing Yellow Flashing Red Recovering battery from very low state
of charge
<35% Steady Yellow Flashing Red Normal charging
35 – 75% Steady Yellow Flashing Yellow Normal charging
75 – 90% Steady Yellow Flashing Green Normal charging
>90% Flashing Green Flashing Green Final charging
100 % Steady Green No LED Fully charged
The charging time for a full charge of an empty 570 Wh battery (from 0 to 96%) is about 2.3 hours
in combination with the included quick charger. At a premium price you can buy our biggest 850
Wh battery, its charging time is about 3.5 hours.
Make sure that the battery is no longer connected to the
charger, after the successful charge process. Likewise, the
charger should be disconnected from the power supply.
Battery and charger become warm during charging. Ensure
adequate ventilation of the battery and charger. The vents
should not be covered.
Place the charger and battery on clean surfaces. Prevent
contamination of the charging sockets on the charger and
the battery.
Avoid humidity and direct sunlight.
Attention! If the charger is damaged, please contact an
authorized retailer. Never open the charger.
The Klever Mobility propulsion