20
www.klever-mobility.com
6.3.1 Charging the battery
You can charge the battery on or off your bike (e.g. important
in winter time) (image 11A & 11B). Charging at any time, even
after a partial discharge (e.g. after a short distance of a few
kilometres) is possible. There is no need to wait until it is
completely discharged, as it has no memory effect.
To remove the battery pack, refer to section 6.3.3.
Caution! Charge the battery only with the supplied and
proprietary battery charger.
For the technical data of the charger please read section 11,
Technical data on page 41.
To charge the battery, do the following: You can monitor the
charging process on the basis of the indicator LEDs on the
charger and battery.
• Connect the power cable to the charger.
• Insert the power plug of the charger into the wall socket,
the LED will start to flash red.
• The charger is ready for charging once the LED lights
steady red.
• Connect the socket of the charger into the socket of the
battery. The charging process will start automatically.
• The LED on the charger switches to flashing yellow light,
charging begins.
• The LED indicator turns to yellow continuous light, the
battery is charged to about 35%, The charging is in progress.
• The LED changes to flashing green, the battery is to about
75 - 90% charged.
• The LED steady green, the battery is now fully charged, the
charging is complete.
• Disconnect the power plug from the Wall socket.
• Unplug the socket of the charger from the battery socket.
The Klever Mobility propulsion
Power cable
Power plug
Charger
Image 10
Image 11B
Image 11A
Summary of Contents for X SPEED
