Klever X SPEED, User Manual

Page: 31 / 56

31 www.klever-mobility.com
Since the chain is one of the parts that wears out on your
bike, it should be replaced, if worn. A worn chain has poor
shifting characteristics, and leads to increased wear of the
chain wheel and the sprockets of the cassette.
The control of the chain wear should be carried out at
the dealer, who has the necessary tools to measure and
replace it.
Caution: A poorly riveted or badly worn chain may break
and causes serious falls or injury.
You will find more information in the enclosed operating
manual of the chain.
7.7 Lighting
Your Speed Pedelec is equipped with high-quality lighting
which corresponds with the type regulation and has an
official mark: indicated by the letter E, and a six-digit number.
The lighting is supplied by the battery power of the vehicle. The
headlight is a LED with high output and standlight function.
The taillight is a bright LED too with standlight function, with
brake light and license plate illumination.
If there is a failure in the lighting system please verify that the
light switch on the display is switched to “On”, check all contacts
at headlight and taillight. Check all cables for damage.
If you don't find any errors, you should be looking for repair at
an authorised dealer immediately.
Caution: A non-functioning light is illegal and endangers
your life on the road. Bicycles without lights are easily
overlooked in the dark. You would risk serious accidents.
More information on the headlight and the taillight can be
found in the manual from the lighting supplier.
7.8 Wheels and tires
The wheels are one of the most stressed components of the
vehicle. They contact the road provide the propulsion and
they absorb the road bumps. Due to the heavy use, they
should be regularly checked.
All wheels are manufactured with great care and precision.
The Speed Pedelec