Kleinn Air Horns SDKIT17-230STD, Installation Manual

Page: 20 / 30

SDKIT17-230/734STD
Installation and Operation Manual
Go to Table of Contents PG 20/30 REV: BETA (4/13/2020)
9.2. Install Air Horn Bracket (SD17-304)
9.2.1. Using Hardware #H1, H2, H3, H4, & H5 install Brackets onto Spare Tire Crossmember, as shown below. It
is recommended to apply medium-strength Loctite to Bolts and final torque to 75 in-lbs .
NOTE: Initially install Large Bracket -304 using only two (2) bolts, to facilitate alignment with other bolts.
Then insert remaining hardware into front are rear slots, from top down into Bracket
Figure 6 – Underbody view of Crossmember with Mounting Holes and Bolts installed (2017 F-250 shown)
Figure 7 – Installing SD17-304 Bracket (Exploded view shown)
Front Slot
FRONT
Insert these 2
Bolts first
Two (2) Holes Rear Slot
H2 (12)
H1 (4)
H3 (4)
H4 (4)
M1
H5 (4)
Crossmember
between Fender
Washers & Bracket
75 in-lbs