Kleinn Air Horns SDKIT17-230STD, Installation Manual

Page: 8 / 30

SDKIT17-230/734STD
Installation and Operation Manual
Go to Table of Contents PG 8/30 REV: BETA (4/13/2020)
4. Application Chart
4.1. Bolt-On Vehicle List
SDKIT17-230/734STD is a direct bolt-on aftermarket product for FORD vehicles listed in below chart; every effort
has been made to verify correct fitment on these vehicles in their factory, non-modified conditions.
MODEL YR MODEL DRIVE ENGINE BODY TRIM
2017-2020 F-250 SUPER DUTY ALL ALL ALL ALL**
2017-2020 F-350 SUPER DUTY ALL ALL ALL ALL**
NOTE: All vehicles listed may require drilling holes for ground wires and installing switches, based on
preference of installed switch locations and wire grounding points.
4.2. **Excluded Vehicles
4.2.1. N/A
4.3. Aftermarket Product Compatibility
4.3.1. This kit has been designed to be compatible with following products from leading manufacturers:
•
Most aftermarket suspension systems that directly-bolt on (i.e., utilize OE mounting points)
•
Aftermarket power steps and rocker steps/running boards
•
Aftermarket front bumpers
•
Aftermarket rear bumpers
4.3.2.
This kit has NOT been designed to be compatible with any of the following products:
•
Any aftermarket product that occupies space where Spare Tire resides
•
Aftermarket exhaust systems
NOTE: Review this manual in full before unpacking items and verify correct space and mounting locations
exist with your aftermarket product(s).
To install this kit alongside your other aftermarket product(s),
modification to included parts, your vehicle, or aftermarket product(s) may be required.
End of Section