Kleinn Air Horns SDKIT17-230STD, Installation Manual

Page: 11 / 30

SDKIT17-230/734STD
Installation and Operation Manual
Go to Table of Contents PG 11/30 REV: BETA (4/13/2020)
5.2. Install Process Outline
For person(s) with prior experience installing SDKIT17-230/734STD, a reminder of install steps are listed
below:
UNPACKAGE KIT ( SECTION 7 )
1. Layout and organize all parts on bench
BENCH ASSEMBLY (
SECTION 8 )
2. Remove Air Horn Trumpets from Air Horn sub-assembly
ON-VEHICLE, MECHANICAL (
SECTION 9 )
3. Install SD17OBA-6450; reference SDKIT17-230/734 Installation & Operation manual
4. Remove Spare Lift Mechanism
5. Install Air Horn Bracket (SD17-304)
6. Install Air Horn Ore Support Bracket (SD17-306) – 734STD ONLY
7. Install Air Horn Sub-Assembly
8. Install Air Fittings on Air Tank; i f SD17OBA-6450 is NOT already installed, assemble new Air Fittings to Air
Tank during Bench Assembly
9. Connect Air Tubing to Air Tank and Electrical Wiring
ON-VEHICLE, ELECTRICAL (
SECTION 10 )
10. Install Relay & Fuse, route Wiring, and install Horn Button
11. Connect all Electrical items (Air Horn, Pressure Switch, Air Compressor)
FINAL STEPS (
SECTION 11 )
12. Install Trumpets onto Air Horn Drivers & Final Tighten Air Horns
13. Test system and adjust, as needed
5.3. Approximate Installation Time
SDKIT17-230/734STD is a multi-faceted product consisting of mechanical, electrical, and pneumatic
components.
For a typical home mechanic, auto enthusiast, or technician installing this kit for first time, a professional
installation job with setup and testing of final product, is estimated to take:
•
6-12 Hours
End of Section