SDKIT17-230/734STD
Installation and Operation Manual
PG 24/30
REV: BETA (4/13/2020)
9.6.
Final Trumpet Installation
9.6.1.
Re-attach Trumpets to Air Horn Drivers, as shown below. Ensure Trumpets are firmly tightened by
grasping Metal/Chrome Collar, as performed earlier.
9.6.2.
On 734STD, apply light grease or Vaseline to inside rubber face on Ore Locks, then insert Trumpets through
Ores and tighten firmly.
Figure 11
–
Re-attaching Trumpets (Exploded View shown as if installed in vehicle)
End of Section
LONG
SHORT
Apply light
grease/Vaseline
inside Ore
