SDKIT17-230/734STD
Installation and Operation Manual
PG 22/30
REV: BETA (4/13/2020)
9.4.
Install Air Horn Sub-Assembly
9.4.1.
Using Hardware included (*) inside of Horn Packaging, install Air Horn sub-assembly onto Bracket, as
shown below then
final torque to 75 in-lbs.
9.4.2.
Using Hardware included (*) inside of Horn Packaging, install Horn Support Ore Locks, as shown below.
Finger tighten hardware on Ore Locks at this time.
**NOTE:
230STD does NOT include Horn Ore Supports.
Figure 9
–
Air Horn Sub-Assembly installation (Exploded View of 730 Horn with Ore Supports shown)
*LOCK
*M8 BOLT
*LOCK
734STD
ONLY
FRONT
75 in-lbs
*FLAT
*FLAT
*NUT
*M6 BOLT
*FLAT
*NUT
