Kleinn Air Horns SDKIT17-230STD, Installation Manual

Page: 16 / 30

SDKIT17-230/734STD
Installation and Operation Manual
Go to Table of Contents PG 16/30 REV: BETA (4/13/2020)
7.6. Hardware, Fasteners and Soft Parts
NOTE: Pictures only indicative, not to scale and may not represent exact item
ITEM QTY. DESCRIPTION WHERE USED PICTURE
H1 4 (5/16"-18 X 1.00" LONG)
RIBBED NECK CARRIAGE BOLT,
GRADE 2, ZINC-PLATED HORN BRACKET MOUNTING (4)
H2 12 (5/16 ” ID X 1.5" OD)
FLAT WASHER, FENDER, ZINC-
PLATED
HORN BRACKET MOUNTING
(12)
H3 4 (5/16" ID X 0.88" OD)
FLAT WASHER, USS, ZINC-
PLATED HORN BRACKET MOUNTING (4)
H3 4 (5/16")
LOCK WASHER, SPLIT, ZINC-
PLATED HORN BRACKET MOUNTING (4)
H4 4 (5/16"-18)
HEX NUT, GRADE 2, ZINC-
PLATED HORN BRACKET MOUNTING (4)
7.7. Add-On Accessories
ITEM QTY PART NUMBER DESCRIPTION PICTURE
X1 - - -
End of Section