4
Product Features
Figure 1
About Your Oven
Above you will find an illustration of a
Kleenmaid oven showing the components of
the oven.
Cooling Fan
The oven has a cooling fan to cool the control
panel.
You may hear this fan continue to run after
cooking and/or cleaning has been completed.
The fan will run as long as the oven is hot and
the oven’s function selector is turned to any
position other than “Off”. This is normal
operation.
Rack Positions
The oven has rack guides at four levels as
shown in the illustration.
Each level guide consists of paired supports
formed in the sidewalls on each side of the
oven cavity.
The rack should be positioned within the
paired supports. Each oven is provided with
the following parts and utensils.
TO900X -
single oven
TO950X
- both upper and lower ovens
•
2 x wire shelves
•
1 x telescopic rack
•
1 x insert grill wire rack
•
1 x baking pan
Always be sure to position the oven racks,
etc. before turning the oven on.
Make sure that the rack(s) are level once they
are in position.
To remove oven rack from the oven, lift rack
at front and lift out.
To replace oven rack:
1.
Place rear of rack between the rack level
guides.
2.
While lifting front of the rack, slide the rack
in all the way, then lower front. Please
refer to the illustration on the following
page if there is any question as to which
side is the front of the rack.
