21
INSTALLATION INTRODUCTION
Please read these instructions COMPLETELY
AND CAREFULLY. They will save you time
and effort and help to ensure optimum oven
performance. Be sure to observe all
WARNINGS.
These installation instructions are intended for
use by a qualified installer. In addition to these
instructions the oven must be installed in
compliance with the current Australian
Standard.
TOOLS YOU WILL NEED
The following tools are needed to install your
new oven:
•
Tape measure and straightedge or ruler
•
Pencil
•
Phillips screwdriver
•
Level
•
Wire cutters and wire stripper
•
1" hole saw
•
Hand or saber saw.
POWER REQUIREMENTS
The oven must be supplied with the proper
voltage and frequency. The oven is
manufactured to be connected to a three wire,
single phase, 240 volt, 50 Hz AC electrical
supply on a separate circuit.
A circuit breaker or time-delay fuse sized not
to exceed the circuit rating of the appliance
specified on the rating plate located on the
frame behind the door of the oven is
recommended.
The oven must be supplied with copper wires
ONLY.
A qualified electrician must perform the
electrical wiring and hook-up of your oven.
After installation is complete have the
electrician show you where the main
disconnection is and which of the circuit
breakers/fuses are for the oven.
CHOOSING OVEN LOCATION
Carefully select the location where the oven
will be placed.
The oven should be located for convenient
use in the kitchen, but away from strong
drafts.
Strong drafts may be caused by open doors
or windows, or by heating and/or air
conditioning vents or fans.
Make sure that electrical power can be
provided to the location selected.
STEPS FOR INSTALLATION
The following pages provide the necessary
information for proper installation of the oven
arranged as follows:
•
Technical Data
•
Installation Cutout Dimensions, Required
Clearances and Mounting instructions for:
- Wall Installation, Single Oven
- Wall Installation, Double Oven
•
Electrical Supply and Wiring
Requirements
•
Electrical Connections for 3-Wire Circuit.
•
Final Checklist.
