17
WARNING!
Make sure the oven and lights are cool
and power to the oven has been turned
off before replacing the light bulb(s).
Failure to do so could result in electrical
shock or burns.
The lenses must be in place when using
the oven.
Replacing an Oven Light
Each oven is equipped with two halogen lights
located in the back wall of the oven. The lights
are switched on when the door is opened or
when the oven is in a cooking cycle. The oven
lights are not illuminated during SELF-
CLEAN. Each light assembly consists of a
removable lens, a light bulb as well as a light
socket housing that is fixed in place, see
Figure 7. Light bulb replacement is considered
to be a routine maintenance item.
To replace a light bulb:
1. Read WARNING on this page.
2. Turn off power at the main power supply
(your fuse or breaker box).
Figure 7.
3. In Multifunction ovens remove the fan
cover by unscrewing the four screws.
4. Remove the lens by unscrewing it.
5. Remove the light bulb from its socket by
pulling it.
6. Replace the bulb with a new one taking
care not to touch it with naked fingers.
Their grease can damage the bulb when it
becomes hot.
The bulb is halogen 12V-20W.
7. Screw the lens back on.
8. Replace the fan cover if the cavity is
provided with.
9. Turn the power back on at the main power
supply (your fuse or breaker box).