Kleenmaid TO101X, Instructions For Use Manual

Page: 18 / 28

Instructions for use, installation and connection
18
Removing oven door with a single
axe hinge
Open the door completely and turn the removable
locks backwards (see fig). Then close the door
slowly and let the locks fit to the notches. At an
angle of about 15 ° lift the door slightly up and pull
the door from the hinge supports (fig. 2).
For reinserting the door repeat the procedure
backwards. Insert the door at an angle of about
15 ° into the hinge supports by pushing them
forward and downwards, so the hinges lock into
their slots (fig. 3). Check if the hinges are locked
into their respective slots.
Now open the door completely and turn the
removable locks into their original position. Close
the door slowly and check if they close properly
(fig. 4). If you have trouble closing the door, check
if the hinges are properly inserted into their slots.
Attention ! Never let the hinge locks spring out, as
the springs are strong and may cause injuries.
Accessories
Accessories, like the biscuit tray, oven tray, etc.
are cleaned with hot water and the usual
detergent.
Special enamel
The oven, interior door lining, baking tray and
grease interception pan are coated with special
enamel, with smooth and resistant surface.
This special coating facilitates cleaning at room
temperature.