-41
-
At short notice the indication „PROG“ appears with a rotating beam.
This shows that the chosen printer driver is stored in the EEPROM.
After this there is a jump back directly into the measured value
indication.
For the transfer of the measuring dates an interface converter is
necessary which is converting the serial data in parallel data placing
them at the disposal of the printer.
A further requirement is that measuring data have been stored.
If a printout is planned both of the keys and
have to be pressed one after another. The following notification with the
printing type „graphics“ appears.
With the keys the printing type „graphics“ is confirmed,
and the menu for scaling is shown.
The user now has the possibility to choose between an automatic and a
manual scaling.
In our example the automatic scaling is called over the key
and confirmed with the key .
The chosen printer is indicated and has to be confirmed with the key
.
After a short internal counter-checking – the time is percentally
represented in the notification (from 0 to 100 %) – the printout starts.
With an automatic scaling all measuring dates are subjected to an
internal counter-checking (corresponding to the measuring range of the
sensor) and adapted to the maximum writing height of the printer. The
measuring dates are printed out as graphical representation of the curve
run.
* * * * * * PROG * * * * * * *
5.2 Definition of printing type:
* * Type of printout * *
Graphic
PROG-> Confirm
* * Scaling * *
manually
PROG-> Confirm
* * Scaling * *
Automatically
PROG-> Confirm
Prog
ENT
5.4 Definition of scaling:
61.8
kN
65.7
kN
TF 70
F
F ^
Prog
ENT
Output
* * Menu Printer * *
* Printout
Choice of printer
Prog
ENT
5.3 Choice of graphics:
* * Printing * *
HP colour
PROG-> Confirm
Prog
ENT
5.5 Choice of automatic scaling: