-36
-
4.4
Adjustment of completely optional
force- resp. pressure measuring ranges
as calibration value
If you want to adjust the measuring ranges so press the
keys and . .
By the key the star symbol is adjusted to the line
„calibration value“.
With the key the choice is confirmed.
The following menu appears.
In our example a special force sensor of 70 kN is adjusted to the final
value of its measuring range.
Please observe the cursor below the figure.
Prog
ENT
* * * PROG F * * *
* calibration value
zero point adjustment
PROG->Confirm
Prog
ENT
* * * * PROG F
0 . . . 70.0 kN
0 ... 15736 lbf)
7
0
.
0
* * * * * * * PROG * * * * * * *
Prog
ENT
Please just try the input according to our example in order to get a little
practice.
After that you just have to confirm the input of figures with the
key .
The rotating beam shortly appears, and your input is stored.
Briefly afterwards the familiar screen with the measured values
automatically appears again.
If you want to input a calibration value for a special pressure sensor you
have to select the sequence of keys and .
The course for the input of pressure-calibration value „p“ is taking place
in analogy to the previously described operational follow-up for „F“.
Prog
ENT
61.8
kN
65.7
kN
TF 70
F
F ^
Prog
ENT
F
p