Klauke TEXTRON TC 1, Operating Instructions Manual, Page: 33 / 48

-33
-
After this the appliance jumps back straight to the indication of measured values.
After an initializing the default settings stated in the following example are valid:
Force-sensing F
Force measuring range preadjusted on 0 to 70 kN
Measuring units in Sl
Language German
INIT?
Prog
ENT
INIT? 20.05.99
PROG->Yes
61.8
kN
65.7
kN
TF 70
F
F ^
The call for initializing comes automatically. Here you can decide whether you want to
initialize or not.
If you don’t want any initializing, press any key except for „Prog/Ent“, and the indication
of measured values appears automatically.
If you however want an initialisation, press the key , and all your data fed
before like calibration value, measuring units are erased.
0.0
bar
0.0
bar
TP 200
p
p ^
INIT? 20.05.99
PROG->Yes
Prog
ENT