Klarstein 10033707, Manual, Page: 41 / 112

41
EN
Replacement light
Ø
Max.
Power
Voltage Picture
ILCOS D
code
70 mm 1.5 W DC 12 V
DSR-
1.5-S-70
33,2 mm
x 120 mm
1.5 W DC 12 V
DSS-1.5-
S-33.2
/120
TROUBLESHOOTING
Problem Cause Solution
Light on, but motor does
not work. The blades are blocked. Check the blades.
The capacitor is damaged. Replace the capacitor.
The motor is damaged. Replace the motor.
The internal wiring of
the motor is cut off/
disconnected.
An unpleasant smell may
be produced.
Replace the motor.
Both light and motor do
not work. Apart from the above mentioned, check the following:
The light is damaged. Replace the lights.
The power cord is loose. Connect the wires as
shown in the electric
diagram.
Oil leakage Outlet and the air
ventilation entrance are
not tightly sealed.
Take down the outlet and
seal with glue.
The connection of the
U-shaped section and the
cover is leaking. Take the U-shaped section
down and seal it with a
suitable material.