GL0052-03
– Envireau Mono-Tech Rainwater – Installation & Operation Guidelines
Page 2
HEALTH & SAFETY
These warnings are provided in the interest of safety. You must read them carefully before installing or using
the equipment.
It is important that this document is retained with the equipment for future reference. Should the equipment
be transferred to a new owner, always ensure that all relevant documents are supplied in order that the new
owner can be acquainted with the functioning of the equipment and the relevant warnings.
Installation should only be carried out by a suitably experienced contractor, following these guidelines.
Electrical work should be carried out by a qualified electrician.
Any person carrying out maintenance on the equipment should wear suitable protective clothing, including
gloves. Good hygiene practice must also be observed.
We recommend the use of a dust mask and gloves when cutting GRP components.
Access covers should be selected with reference to the location of the unit and traffic loads to be
accommodated. These are not (normally) part of the units supply.
When covers are removed precautions must be taken against personnel falling into the unit.
Should you wish to look into the tank, please observe all necessary precautions, including those listed below,
which apply to maintenance procedures.
Ensure that you are familiar with the safe working areas and accesses. Ensure that the working area is
adequately lit.
Take care to maintain correct posture, particularly when lifting. Use appropriate lifting equipment when
necessary. Keep proper footing and balance at all times. Avoid any sharp edges.
MAINTENANCE
The correct ongoing maintenance is essential for the proper operation of the equipment.
The removal of solids which accumulate in the unit should be carried out by a contractor. The contractor
should refer to the guidelines in this document.
This tank is designed to collect and store rainwater. It should not be used for any other purpose without the
agreement of Envireau.
