background image

7

General notes

2. Before using the hood

3. Using the hood

3.1 Operating safety 

information

Ensure that the hood has not suffered 

damage during transport.

Installation  and  connection  of  the  elec

-

trical supply and the exhaust air must be 

carried  out  by  experienced  tradesmen 

according to the manufacturer’s instruc

-

tions  and  in  compliance  with  the  local 

requirements.

The exhaust air hose must not be made 

from or contain flammable materials.

•  The grease filter must always be 

in place when operating the hood, 

otherwise grease vapour can become 

deposited in the hood and the exhaust 

air system.

•  With gas hobs, take care that hobs 

are not operated without cooking 

utensils. Parts of the hood can be 

damaged by the rising heat from open 

gas flames.

• 

Flame cooking under the hood is not 

permitted due to the fire risk. The 

rising flame can set fire to grease 

deposited in the filter.

 

 

of the heater or other non-electric opera-

ted appliances.

c) No flambé dishes are to be prepared 

under  the  extractor  hood.  The  open 

flames  could  destroy  the  hood  or  even 

cause a kitchen fire.
d) 

Never  leave  pans  unwatched  when 

frying because fat can easily catch fire.
e)  Constant  maintenance  guarantees 

problem-free  operation  and  optimal 

hood performance.

f)

 If the hood is used together with other 

nonelectrically operated appliances, the 

room partial vacuum must not exceed 4 

Pa (4 x 10-5 bar).
g) Make sure that the room is adequately 

ventilated.

h)

  Regularly  clean  encrusted  food  from 

appliance surfaces.

i) Regularly clean or replace the filter.

!

!

!

EN

Summary of Contents for PREMIUM FREE6020ED

























Reviews: