22
Installation of the hood
4. Mounting the flue
a) Put the telescopic shaft in the
ground slot.
b)
the slide so completed chim
-
ney shaft on the motor housing
and pull out the telescopic shaft
to the desired height to define the
optimal position of the mounting
bracket.
c)
Attach the mounting bracket
to hold the wall, align horizontal
with a spirit level and mark the
holes on the wall.
d)
Drill two 4mm holes in the wall
and fasten the bracket with two
screws to the wall.
f) Attach the telescopic shaft with
the screws on the bracket.
g) Telescopic shaft is screwed
from the bottom to the housing
(so, please remove the metal filter
and charcoal filter and screw from
the inside).