17
Installation
Filter cleaning:
If the symbol A (filter cleaning) is flashing,
the unit remembers it, clean the filter, or
swap it. After the filter has been cleaned
and re-inserted into the extractor hood,
press the A button until it stops flashing.
Alert function:
Pressing the F key (Alarm) you can set
using the arrow keys to select one alarm
time. Here you will hear an alarm signal
that can be switched off by pressing the
icon again. To cancel the alarm tempora
-
rily, press the F button for 3 seconds.
Automatic after-running:
First set your speed (keys C and E). Then
the B button for 3 seconds - the timer fla-
shes. Now set your desired time (C and
E). After about 5 seconds, the clock icon
only flashes, the timer is running on.
Setting the time:
When you press the button A for 3 se-
conds, the time will flash on your screen.
By repeatedly pressing the A button to
show the hour (using the arrow keys C
and E) to adjust. Pressing the A button
leads to the minutes setting.
EN
