20
Installation of the hood
12. Before installation
12.1 Betriebsmodi
Exhaust air mode
ohne Kohlefilter
Installation for circulating air filter
mode
!
!
1 Clean the area thoroughly before installation, so that at the first time, no
dust or debris can be aspirated.
2 The exhaust hose must not be routed together with gas pipes, hot-air
pipes, etc. through a chute. The exhaust tube
3
should be as straight as possible carried away from the cover and guided
at a maximum deflection of 120 ° towards the outside and secured to the
outer wall.
4
In order to avoid accumulations of fat in a corner, make sure when instal
-
ling that the hood is suspended horizontally.
Same procedure
as described un
-
der the following
chapter B. Howe
-
ver, omit step 2.
In addition fit the
carbon filter(s)
A2 before moun-
ting the grease
filter (Fig. A1)
Please see installation specifica
-
tion in chapter 7.1.