36
Programming selection
This device is fully digitally controlled. There are three
modes:
POWER OFF mode
no power connection, display is off, no light.
STANDBY mode
power connection, display shows current time only or
display is dark (if display set OFF). Only On/Off
, Menu
, Program
and Child lock
buttons are allowed
to use at this mode.
For example:
Standby mode: CURRENT TIME page
At STANDBY mode, press button On/Off
, or button
Program
, display shows
PROGRAMME page (WORKING mode). Press it again, go
back to CURRENT TIME page (Standby mode).
At STANDBY mode, press button Menu
, display
shows “Minute minder”, time flash, press
or
to
set the Alarm CLOCK time, press button
to start it.
Display shows two time, top one is Current time. Bottom
small one is the Alarm Clock time, when it counts down
to zero, the oven will show “MINUTE MINDER END”, and
BEEP for one minute or until any of the icons is pressed.
At STANDBY mode, press button Child lock
, display
shows below. Choose the one you select and then press
button
to confirm. If choose “Switch On” will lock the
control panel, only
button available to active.
To unlock, choose button
, select “Do not Switch On”.
Using the device
Control Panel
