KitchenAid KBFC42FS, Technical Education

Page: 53 / 76

4-31
REMOVING THE WATER FILTER HOUSING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
WARNING
5. Remove the water valve (see page 4-30
for the procedure).
6. Remove the two hex-head screws from
the front of the water filter mounting
bracket.
1. Unplug refrigerator or disconnect power.
2. Turn off the water supply to the refrigera-
tor.
3. Remove the water filter from the bottom
of the refrigerator.
4. Remove the two screws from the base
grille and remove the grille from the bot-
tom of the refrigerator.
Screw Screw Water Filter Base Grille
Water Inlet Tube
Filter Housing
Water Filter Mounting Bracket
7. Pull the water filter housing forward as
far as it will go, then disconnect the water
inlet tube from the filter housing, and re-
move the housing from the refrigerator.