KiSS ORCA SPIRIT, Manual

Page: 110 / 124

6. If removed, replace the mushroom valves (26) by gently pulling the retainer stem
through the valve holders (22, 23) , while twis ng, un l the retaining fl ange is completely
inside the valve holders (22, 23) and properly seated (Fig. 14) .
DANGER: DO NOT put lubricant on the MUSHROOM VALVES (26).
7. Lightly lubricate and re fi t the valve holder O ‐ rings (24, 25) . Then press the valve
holders (22, 23) back into place (Fig. 15) . Be careful not to pinch the O ‐ rings (24, 25) .
8. Lightly lubricate and install the hose adapter O ‐ rings onto the hose adapters.
9. Slide the hose nuts and silicone sleeves over the ends of the breathing hoses. Then install
the BOV hose adapters onto the breathing hose ends (Fig. 16) .
10. Using Oe ker style pliers rea ach the Oe ker clamps (Fig. 17) .
Figure 14
Figure 15
Figure 16
Figure 17