KiSS ORCA SPIRIT, Manual

Page: 37 / 124

37 MSL 72.161 Jetsam/Orca Spirit manual R.5
BATTERY WARNING:
When you turn the HUD on, if it flashes orange for 30 seconds, this indicates a low ba ery.
The ba ery is contained in the box with the processor. To change the
ba ery, you will need to remove the top cover. Replace the ba ery with
a 3.6 volt Lithium ‐ Sa 14500. Ensure when replacing the cover that the
O‐rings are properly secured, cleaned and lubricated.
It would be beneficial to carry a spare ba ery in your spares kit, as they aren’t available in some remote areas. This
should not be a cause for concern as the ba ery should last many months, even years.
REBREATHER ATTACHMENT
The box should be a ached to the loop hose, behind the divers head. Use the
enclosed Velcro for this. In this loca on it will not be in the way and it is also
possible to reach the bu on.
A ach the HUD e to either side of the BOV. It is handy to a ach it to the le
side so that dumping the right loop hose a er a dive isn’t effected.
Wrap the cable for the HUD around the loop hose, and then snap on to the
a achment.
The HUD a achment consists of 2 pieces; one part a aches to the BOV with
the e and the other the HUD snaps into. The two parts are joined by mag‐
nets. These are extremely strong magnets! Slide magnets apart and back
together only.