KiSS ORCA SPIRIT, Manual

Page: 7 / 124

7 MSL 72.161 Jetsam/Orca Spirit manual R.5
Parts List
1 KISS Orca Spirit ‐ BASIC includes:

1 stainless steel stand which includes: 3 Fastex clamps, 2 wing a achment bolts, 2 Fender washers with nuts, manifold with
adjustment set screw, 1 off board accessory whip rebreather side, 1 ADV LP hose with elbow, 1 wing infla on LP hose.

1 cylinder side off board accessory for the diluent cylinder.

1 gas addi on scrubber head which includes: 1 scrubber head elbow, 1 automa c diluent valve (ADV), 1 hose a achment quick
connect tower, 1 indexing mark, 1 threaded ring, 4 springs.

1 sensor scrubber head which includes: 1 port for the main display, 1 port for a secondary display, 1 hose a achment quick
connect tower, 1 indexing mark, 1 threaded ring, 4 springs, 1 sensor a achment plate, 1 bronze nut, 1 exhaust valve, 3 display
wire sets with molex pins and plug.

2 scrubber canisters which include for each canister: Base with a ached screen, top screen.

2 loop hoses

1 Manual Add Valve (MAV) set which includes: 1 MAV & filter, 2 oxygen rated LP hoses.

1 KISS OS cylinder and valve.

1 KISS OS cover ‐ op ons available are the skeleton (SS frame), black ABS, or the 1/2 size industrial cover (SS).

1 Wing & harness system

Counterlung

1 delrin plug for the oxygen first stage.

2 quick connect hose stubs with 2 hose clamps (to secure loop hoses to towers)

1 thumb drive with manuals and information
DISPLAY OPTIONS

No display, no display cable, no Fischer cable.

Fischer cable only. This is hardwired to the Sensor head.

Fischer cable and Shearwater PPO2 only display. (Cable is hardwired to the scrubber head and display is fi ed to cable via a
Fischer connector.

Fischer cable and Shearwater computer

Shearwater HW PPO2 display and cable. (All hardwired; no Fischer’s)

Secondary display op ons may include PPO2 display, computer or HUD.
Not included :

Display system and cable. See above for op ons.

Mouthpiece (BOV), LP regulator hose, 2 quick connect hose stubs, and 2 hose clamps

Stainless steel ballast rings for the loop hoses. Our rings are .13 lb each for a total of 1.04 lb’s when using our recommended 8
rings.

Oxygen first stage and OPV

Sensors

Swivel elbows, HP & LP

Spare parts such as O‐ring kits. See the back of the manual for a list of recommended spare parts.

Diluent/bailout regulator set

Diluent/bailout cylinder

Pressure gauges