KiSS ORCA SPIRIT, Manual

Page: 106 / 124

HOLLIS BOV (Bail Out Valve)
SPECIFICATIONS
Torques
Inlet Coupling 35 to 40 in ‐ lbs (4 ‐ 4.5 N ‐ m)
LP Hose 35 to 40 in ‐ lbs (4 ‐ 4.5 N ‐ m)
Intermediate Supply Pressure
Preferred 138 psi (9.5 bar)
Acceptable 137 to 139 psi (9.4 ‐ 9.6 bar)
Opening E ff ort IP = 138 psi (9.5 bar)
Recommended Setup Range (Octopus) 1.5 to 2.2 inches of Water
TOOLS REQUIRED
Standard Tools
Inch Pounds Torque Wrench 1/4” Open End Wrench
3/4” Open End Wrench 11/16” Open End Wrench
1/8" Allen Key 3/32" Allen Key
Flat Blade (narrow) Jeweler's Screwdriver Co on Swab (Q ‐ Tip)
Specialty Tools
Tribolube 71
Christo ‐ Lube MCG 111
Intermediate Pressure Gauge
O ‐ ring Tool Kit
In ‐ line Adjustment Tool
BOV SPOOL TROUBLESHOOTING
SYMPTOM POSSIBLE CAUSE TREATMENT
Failed mushroom valve checks obstructed or damaged mush ‐
room valves (26), valve holders
(22, 23) , or O ‐ rings (24,
25)
clean/replace mushroom valves
(26) , valve holders (22, 23) , and
O ‐ rings (24, 25)
Leaking gas out of Breathing Loop
worn O ‐ rings (18, 24, 25, 29) replace O ‐ rings (18, 24, 25, 29)
Rough spool (16) opera on dirty or damaged ma ng surfaces clean/lubricate/replace
O ‐ rings (18, 29) , housing (1) , or
spool (16)
Water spool (16) 1. mouthpiece (27) or Ty ‐ Strap
(28) damaged, loose, or missing
2. bad O ‐ rings (18, 24, 25, 29)
3. Leak in Breathing Loop
1. replace Ty ‐ Strap (9) and/or
mouthpiece (27)
2. replace O ‐ rings (18, 24, 25,
29)
3. see the "Breathing Hoses and
Counterlungs" chapter