KisanKraft
®
MITSUBISHI ENGINE
: +91.80. 22178200
Page 16 of 32
SAFETY PRECAUTIONS
You have to observe the descriptions indicated with this mark because
they contain very important information to assure the safety.
PROHIBITED ITEMS
•
No person who does not understand the content of this manual should be
allowed to operate the engine.
•
The engine should not be operated at the indoor or a place with poor
ventilation. (Exhaust gas contains odourless and harmful carbon monoxide.)
•
Do not insert into or approach hands or foot to the moving or revolving
sections.
•
Do not store, spill or use gasoline in the vicinity of the fire, stove, furnace or
devices using the pilot flame or sparks like a water heater or others. (There is a
risk of explosion.)
•
Do not refill the fuel indoors or at a place not well ventilated.
•
Do not refill the fuel while smoking.
•
Do not remove the fuel tank cap or refill the fuel during engine operation or
immediately after the operation when the engine is still hot. (Wait for more than
2 minutes after terminating the operation before refilling the fuel.)
•
Do not operate the engine when gasoline has spilled, smell of gasoline is felt or
there is a risk of explosion.
•
Do not adjust the engine speed setting unnecessarily.
•
Do not check sparks while the ignition plug is removed.
•
Do not operate the engine with the muffler or air cleaner cover removed.
(Inspect
particularly the muffler at regular intervals for loose mounting screws, breakage
or leakage, and repair or replace it if any abnormal condition has been
discovered.)
•
Do not operate the engine when grasses, leaves or inflammable substances
are stuck in or around the muffler.
•
Do not touch the parts of the muffler or engine at high temperatures. (There is
a risk of burn.)
•
Do not touch the ignition plug or high-voltage cord during operation. (There is a
risk of electric shock or physical injury.)
•
Make sure to stop the engine whenever the work is interrupted or moving the
engine to another place.
•
Do not operate the engine alone. (It must be connected to the driven
equipment when it is operated.)
