KisanKraft
®
MITSUBISHI ENGINE
: +91.80. 22178200
Page 20 of 32
METHODS OF STARTING AND STOPPING THE ENGINE
START (CHOKE TYPE UNIT)
1.
Turn the engine switch to the “ON” side.
2.
Set the throttle lever at the slowest speed
position.
3.
Push the priming button repeatedly with
finger till it hits the top. (More than 10
times)
Pressing the priming button is necessary to
prime the fuel to facilitate the start-up.
Since any excess amount of primed fuel
returns to the tank, there is no problem of
over-priming. Prime the fuel rather more
than sufficiently to avoid starting trouble.
4.
Turn the choke lever to the fully closed
position
(at the
Mark).
When sufficient fuel is retained and the
engine is warm, set the choke lever at the
fully opened
position (at the
mark)
5.
While holding down the engine firmly,
grasp the recoil starter grip and pull
vigorously
