KisanKraft
®
MITSUBISHI ENGINE
: +91.80. 22178200
Page 17 of 32
•
Check frequently the parts used in the fuel line for cracks or leakage, and
replace them if necessary.
•
Remove dirt, grasses or other trash from the cooling fins and the cooling air
inlet. (Make sure to stop the engine and the driven equipment before cleaning.)
•
Make sure to use always new gasoline. (Old gasoline may cause sticky
substance adhering at the inside of carburetor or operation trouble.)
•
Before starting the engine, confirm that the area of radius 15 m around it is
evacuated and no tank filled with fuel, or others are not left over.
•
Make sure to use only the genuine parts supplied from the Mitsubishi Meiki
Engine. Use of parts other than the genuine parts could cause trouble to
engine or premature abrasion.
NOTE
Important safety items quoted in this manual do not necessarily cover all situations or
conditions that could occur. Although sufficient cares have been taken to assure the
safety of the engine, operators or service personnel must observe necessary precautions
to operate it safely and protect themselves from possible dangers.
NAME OF THE COMPONENTS
1.
Recoil starter grip
2.
Starter lever
3.
Cooling air inlet
4.
Fuel tank cap
5.
Fuel tank
6.
Muffler
7.
Exhaust outlet
(Types vary depending on the specifications)
8.
Engine switch
(Types vary depending on the specifications)
9.
Clutch
10. Ignition plug cap
11. Air cleaner
12. Carburetor
13. Priming button
