KisanKraft
®
MITSUBISHI ENGINE
: +91.80. 22178200
Page 21 of 32
6.
When the engine has started, return the choke lever gradually to the fully
opened
position (at the
Mark).
If only exploding sounds are heard, but it does not start, return the choke lever
to the fully closed position and pull the starter grip vigorously once again.
START (STARTER LEVER TYPE UNIT)
1.
Turn the engine switch to the “ON” side.
2.
Set the throttle lever at the slowest
speed position.
3.
Push the priming button repeatedly with
finger till it hits the top. (More than 10
times)
Pressing the priming button is
necessary to prime the fuel to facilitate
the start-up. Since any excess amount
of primed fuel returns to the tank, there
is no problem of over-priming. Prime
the fuel rather more than sufficiently to
avoid starting trouble.
4.
Turn down the starter lever of
carburetor to set it at the start position.
It is not necessary to operate the starter
lever when the engine is warmed up
(For about 15 minutes after stopping
the engine.)
(To be left in the operating position)
Depending on specifications, the starter
lever may be provided at the throttle
wire side.
