KisanKraft
TM
2-STROKE PETROL ENGINE
: www.kisankraft.com
: +91.80. 22178200
Page 41 of 48
ADJUSTING THE CARBURETOR
Engine revolution speed is adjusted at the optimum condition before shipping
from the factory. It should be adjusted only when it fails to operate properly. (Consult
your dealer when adjustment is necessary.)
1. Use the slow speed adjusting
screw to adjust the slow speed
revolutions.
Right turns: Increase the
revolution speed.
Left turns: Slow down the
revolution speed.
Increasing the slow revolution
excessively causes the driven
equipment unable to stop
even if the throttle lever is
returned. The revolution
speed should not be increased
excessively.
2. In case with the slow speed
fuel adjusting screw Normal
position is where it is returned
by one turn from the fully
closed position (right turn).
Right turns: Increase the
thickness of fuel.
Left turns: Decrease the
thickness of fuel.
3. In case with the high speed fuel
adjustment screw
Right turns: Decrease the
thickness of fuel.
Left turns: Increase the
thickness of fuel.
Fuel adjustment for the
carburetor is completed at the
optimum condition before
shipping from the factory.
When it is necessary to adjust,
consult your dealer.
Do not decrease the thickness
of fuel too much.
(It could result in the seizure
trouble of engine.)
Slow Speed
Adjusting Screw
Slow speed fuel
Adjusting screw
High speed fuel
adjusting screw
