KisanKraft
TM
2-STROKE PETROL ENGINE
: www.kisankraft.com
: +91.80. 22178200
Page 37 of 48
START (STARTER LEVER TYPE UNIT)
1. Turn the engine switch to the “ON” side.
2. Set the throttle lever at the slowest
speed position.
3. Push the priming button repeatedly with
finger till it hits the top. (More than 10
times)
Pressing the priming button is necessary
to prime the fuel to facilitate the start-up.
Since any excess amount of primed fuel
returns to the tank, there is no problem
of over-priming. Prime the fuel rather
more than sufficiently to avoid starting
trouble.
4. Turn down the starter lever of carburetor
to set it at the start position.
It is not necessary to operate the starter
lever when the engine is warmed up (For
about 15 minutes after stopping the
engine.)
(To be left in the operating position)
Depending on specifications, the starter
lever may be provided at the throttle wire
side.
5. While holding down the engine firmly,
grasp the recoil starter grip and pull
vigorously
CAUTION:
a) When the engine stops on
the way after starting, or
b) When the engine fails to start
after trying the recoil
operation for 7 to 8 times.
Return the starter lever to the operating
position and try the recoil operation.
Engine switch
Slow
speed
