12
INSTALLATION
OPERATION
Operate the Blind
Raising and Lowering the Blind
IMPORTANT:
Whenever raising or lowering the blind, the slats must be in the open position.
■
Pull the single cord down and toward the center to raise and lower.
■
Hold the single cord to the outside to lock the blind in position.
Operating the Automation App and Automation III Remote
Syncing and Programming Your Remote
■
Activate the remote by pulling both plastic tabs from the back battery compartment.
■
Download the Automation App for your smartphone or tablet at
getshadeapp.com
.
■
Open the Automation App and follow the steps to set up your new blinds and remote.
■
Use the Automation App to program and manage your Automation III remote(s) as accessories.
■
For more details, refer to the digital Automation III
Basic Operation
■
Wake up the remote by picking it up or pressing
■
STOP.
■
Press group number(s) 1,2,3,4,5 and/or 6 to select one or more groups. Selected group numbers light up white on the remote.
■
Press selected group number(s) 1,2,3,4,5 and/or6 a second time to deselect one or more groups. Deselected group numbers
are not lit.
OPEN
Tilt slats to
open at 50%
CLOSE
Tilt slats down
to closed position
LEFT ARROW
Tilt slats down
to closed postion
RIGHT ARROW
Tilt slats up to
closed position
STOP
Stops the bind’s
movement
Favorite
- Press once to send
selected blind(s) to
your
Favorite
position*
- Quickly press twice to
send selected blind(s)
to your second preset
Favorite
position**
Group Numbers
Each number represents
a different group
* The default favorite position is the slats upward to 75% (tilted 45 degrees upward).
** Both favorite positions can be updated in the Automation App > Shade Settings
