Canister Cleaner & Attachments
THE PORTABLE SPRAYER
The Portable Sprayer is used only in the Blower Mode.
It is an excellent tool to apply many different types of
water-based liquids to any type of surface. The spray can
be adjusted ranging from very fine to coarse.
PORTABLE SPRAYER SET-UP
1
Unscrew the jar from the Portable Sprayer and fill 3/4
full with non-flammable liquid. Before reinstalling the
jar, make sure the portable sprayer dip tube is attached
to the spray gun body. >
2
Screw the jar tightly on the Portable Sprayer and attach
the Portable Sprayer to the end of the Attachment Hose
in the Blower Mode.
Make certain your Sentria
™
system is set up as a Blower
Unit. The Attachment Hose should be connected to the Air
Exhaust Port (19). •
USING THE PORTABLE SPRAYER
/!\ WARNING:
Never use oil or solvent based paint of any kind in the Portable Sprayer. The
motor is open to the spray and could ignite flammable and volatile solvents.
25
Holding the Portable Sprayer horizontally, aim it
toward a sheet of newspaper. Turn the Sentria system
ON and squeeze the Portable Sprayer trigger, spraying
your non-flammable solution onto the newspaper to
check spray pattern.
NOTE: If the Portable Sprayer must be tilted during usage,
less solution should be used in the jar. This will help avoid
large droplets in the spray. >
1
