Optional Accessories
USING THE ZIPPBRUSH
When attached to the Attachment Hose, the Zippbrush can
be used for a wide variety of cleaning surfaces, includ-
ing upholstery, and carpeted steps. It can be used to clean
automotive interiors.
For optimum results, do not press down heavily on the
Zippbrush. Allow the brush to rotate at maximum speed by
gently moving it side to side on the surface being cleaned.
CLEANING THE ZIPPBRUSH
1
To clean the Zippbrush, press the button on the front
of the brush to release the outer brush ring.
When pressing the release button, avoid placing
pressure on the outer ring brush. >
2
Lift the center Brush/Air Turbine out of the tool and
remove any particles or lint from the brush and turbine.
Also remove any particles left in the tool cavity. >
3
Place the Brush/Air Turbine back in the tool and turn
it until the tabs drop into the slots. Hook the tab on the
rear of the brush ring into the small opening of the tool
and snap it back into place. •
While using the Zippbrush, do not insert fingers into the revolving brush
area or push the release button while the brush is in motion. Keep brush
flat against the surface being cleaned as the brush can throw particles
outward. Do not use on delicate fabrics.
/!\ CAUTION:
While using the Zippbrush, do not insert fingers into the revolving brush
area or push the release button while the brush is in motion. Keep brush
flat against the surface being cleaned as the brush can throw particles
outward. Do not use on delicate fabrics.
While using the Zippbrush, do not insert fingers into the revolving brush
area or push the release button while the brush is in motion. Keep brush
flat against the surface being cleaned as the brush can throw particles
outward. Do not use on delicate fabrics.
45
